If you have carpets that you want to remove, you can call a carpet removal service. They will give you a free estimate and if you want, they will come to your place and remove the carpet for you. Carpet removal cost varies from one service to another but usually, they charge $1 to $1.50 per square foot. This is quite costly but if you can afford it, sure, go ahead. But if you think you can save some money by making this a DIY project, you will need to know some things. Even if you don’t know anything about removing the carpet, don’t worry. We will tell you how you can do it and what you will need.
Pull Up the Carpet
When you are going to remove a carpet, the first thing you should do is pull it up. Take a pair of pliers, pull the carpet from the tack strip connected it to the wall with the pliers. Keep doing it until you’ve pulled all of it. When you see the carpet is free, pull it by hand. Now, cut the carpet into smaller pieces so that it gets easy to move and dispose of.
Remove Carpet Glue
After you remove the carpet, you will see leftover glue on the wall and foundation. To remove it, use a razor, scraper, sparking knife, i.e. which one you feel comfortable with using. If you still see some glues are left, pour boiling water or steam in that area and then remove it with tools mentioned earlier. Keep repeating it until the work is done.
Remove Carpet Tack Strips
Tack strips are small pieces of wood that hold the carpet together with the wall or floor. You can reuse these strips for your newer carpet but for now, you have to remove them. To remove them, first find the strips and the nail heads. Take a pry bar and place it between the floor and the tack strip. Then take a hammer and hit the opposite end of the pry bar to pop up the nail and then remove the nail. Keep doing it until you get all the tack strips. Take all the tack strips and keep them separately in a bag. When the work is done, don’t forget to sweep the floor for any loose nails or splinters.
Remove Carpet from Stairs
Pull the carpet free from tack strips by using pliers. Keep pulling the carpet towards the ledge of the stairs and then use a knife to cut along the nose of the landing. Remove the carpet fully by pulling it from the vertical riser. Like the carpet on the floor, cut this one into small pieces as well.
Conclusion
Carpet removal is not that hard if you know how to do it. Carpet removal cost charged by the “junk haulers near me” services is not so low but if you think doing it yourself will take time and energy that you don’t have, you can still call them. You don’t have to do anything, they will remove, haul and dispose of it for you.
